Resarch & Development Activities

INTERNATIONAL JOURNALS

1 Tanniru Rajesh Babu, Sadayan Rajendra Boopathy, Sajja Rama Koteswara Rao, Guttikonda Raja Kumar, Gabbita Durga Janaki Ram, “Comparison of the welding behavior of P/M borated and I/M borated stainless steel” Materials Testing Sept- 2017, Vol. 59, No 9. Pages: 749–754.

2 Banoth Bhadru, D. Narendar, B. Kiran, "Design and Fabrication of SCARA Robot with 5 Degree of Freedom”, International Journal of Science and Research (IJSR), Vol.6, No.3, Mar-2017. pp.1561-1565.

3 Guguloth Ravi, Banoth Shankar and Thokala Vikram, "Fatigue Analysis and Life Estimation of an Outlet Valve for Diesel Engine”, International Journal of Innovative Research in Technology (IJIRT), Vol. 3, No. 10, ISSN: 2349-6002, Mar-2017. pp. 129-135.

4 G Ravi and B Bhadru, "Fabrication of Petro-Hydraulic Car”, International Journal of Innovative Research in Technology (IJIRT), Vol.3, No.10, ISSN: 2349-6002, Mar-2017. pp.62-66.

5 Maloth Heeralal Thurai Saishart and Guguloth Ravi, "Design Evaluation of Diesel Engine Piston Using Materials CI and Aluminum Alloy”, International Journal of Science and Research (IJSR), Vol.6, No.3, ISSN(e):2319-7064, Mar-2017. pp.1947-1952.

6 Guguloth Ravi, Thurai Saishart, Maloth Heeralal, "Thermal Load Effect on Bimetal Valve by Using Conventional and Blended Fuels”, International Journal of Science and Research (IJSR), Vol.6, No.3, ISSN(e): 2319-7064, Mar-2017. pp.1551-1557.

7 Guguloth Ravi, Thurai Sharat and Maloth Heeralal, "Design Evaluation of a Multi Plate Clutch”, International Journal of Innovative Research in Technology (IJIRT),Vol.3, No.10, ISSN: 2349-6002, Mar-2017. pp.143-149.

8 S. Venkateswarlu, Srinivasa Rao Gampala, Ambadipudi Sunil and H. Shankar, "Design and Demonstrated Enhanced Performance of Solar Vaccine Refrigerator by using Phase Change Materials”, International Journal of Science and Research (IJSR), Vol. 6, No. 3, ISSN(e): 2319-7064, Mar-2017. pp.1180-1186.

9 Guguloth Ravi, Banoth Shankar and Bhukya Gandhi, "Design and Evaluation Of Composite Car-Front Sub frame Rails And Crash Injury Response By Carbon Epoxy And Glass Carbon”, International Journal of Innovative Research In Technology (IJIRT), Vol.3, ISSN:2349-6002, Mar-2017. pp. 161-169.

10 Sunil Ambadipudi, Srinivasa Rao Gampala and S.Venkateswarlu, "Design and Development of a Low Cost Floating Solar Power Plant”, International Journal of Scientific & Engineering Research (IJSER), Vol.8, No.2, ISSN 2229-5518, Feb-2017. pp. 1202-1204.

11 S Venkateswarlu, Srinivasa Rao Gampalam and Ambadipudi Sunil, "Design and Demonstration of Heat Pipe Based Waste Heat Recovery System”, International Research Journal of Engineering and Technology (IRJET), Vol.04, No.02, ISSN(e): 2395 -0056, ISSN(p): 2395-0072, Feb=2017. pp.1415-1420.

12 Srinivasa Rao Gampala, Shankar Halavath, Praveen Kumar Veginati and Susmitha Mandadi, "Performance Evaluation of PCM Lined Evaporator Based Deep Freezer for Storing Ice cream”, International Journal of Innovative Research in Science Engineering and Research (IJSER), Vol.7, No.6, ISSN 2229-5518, Jun-2016. pp.3331-3340.

13 G Raja Kumar, G D Janaki Ram and S R Koteswara Rao, "Effect of activated flux and nitrogen addition on the bead geometry of borated stainless-steel, GTA welds”, Journal of Materials and technology, Vol. 50, No. 3, ISSN 1580-2949, Jun-2016. pp. 357–364.

14 B Ravi, Balu Naik and G. Raja Kumar, "Effect of tool pin profile on the microstructure and mechanical properties of Friction - Stir Welded AA6061-B4C Metal Matrix Composite”, International journal of scientific & engineering research (IJSER), Vol. 7, No. 3, ISBN/ ISSN 2229-5518, Jun-2016. pp.194-198.

15 A Sunil and V Praveen Kumar, "Design and Implementation of Solar Tractor with reflected mirrors”, International Journal of Research in Engineering & Technology (IJRET), Vol. 4, No. 4, ISSN(E): 2321-8843; ISSN(P): 2347-45992016, ISSN 2229-5518, Apr-2016. pp. 7-12.

16 G.Subash Chander, G.Madhusudhan Reddy and V.Venugopal Rao, "Influence of Rotational speed on micro structure and Mechanical Properties of Dissimilar Metal ANSI 304-ANSI 4140 Continuous Drive Friction Welds”, International Journal of Iron & Steel Research, ISSN: 1006-706X ,Vol 19, No.10, Oct-2012. pp-64-73.

17 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Influence of Process Parameters on Impact Toughness And Hardness of Dissimilar AISI 304 and AISI 4140 Continuous Drive Friction Welds”, The International Journal of Advanced Manufacturing Technology (IJAMT), (ISSN:0268-3768), May-2012. pp1-13.

18 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Optimization of Notch Tensile Strength of Dissimilar AISI 4140 & AISI 304 Continuous Drive Friction Welds Using Taguchi Method”, International Journal of Mechanical Engineering, Vol.3 No. 2. Dec-2011. pp. 257 – 263.

19 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Study of Influence of Service temperature Exposure on Properties of Dissimilar AISI 304 To AISI 4140 Continuous Friction Welds”, STEEL GRIPS Journal of Steel and related Materials, ISSN 1611-4442, Jan-2011. pp. 445-453.

 

PROCEEDINGS OF INTERNATIONAL CONFERENCE

1 B Ravi, B Balu Naik and G. Raja Kumar, "Influence of Tool Rotational Speed on the Mechanical and Microstructure Properties of Friction Stir Welded Al-B4CMMCs”, International Conference on Processing of Materials, Minerals and Energy, Ongole, Andhra Pradesh, India. ISSN: 2214-7853, 29-30, Jul-2016. pp. 1-7.

2 B.Ravi, B. Balu Naik and G. Raja Kumar, "Fabrication and Mechanical Characterization of Boron Carbide Reinforced Aluminum Matrix Composites”, Proceedings of International Conference on Trends in Industrial and Mechanical Engineering (ICTIME 2016), ISSN:978-93-84935-66-5., Feb-2016.

3 G.Srinivasa Rao, Praveen laws and G.J Sunil, "Melting Of Metal using Microwave Oven”, Proceedings of International Conference on Science and Engineering of Materials for Future Needs (ICSEMF-2015), Khammam, ISBN 978-1-329-77555-8, Dec-2015. pp. 57-60.

4 Praveen laws, Jyothi Boggavarapu and Srinivas Rao, "Organic Synthesis of Bio-Diesel from Waste Cooking Oil by Microwave Irradiation”, Proceedings of International Conference on Science and Engineering of Materials for Future Needs (ICSEMF-2015), Khammam, ISBN 978-1-329-77555-8. , Dec-2015. pp. 227-232.

5 G.Srinivasa Rao, G.J Sunil, Praveen Laws, "Performance Evaluation of Enclosing the Evaporator with Phase change Material in a deep Freeze Refrigerator”, 3rd National Conference on Innovations In Mechanical Engineering(MITS) 2015, ISBN-978-93-85100-53-6, 23-24 , Dec 2015.

6 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Friction Welding Aspects of Austenitic Stainless Steel To low Alloy Steel”, International Symposium For Research Scholars On Metallurgy, Materials Science And Engineering (ISRS 2010), 20th-22nd Dec, 2010.

7 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Influence of Process Parameters On Impact Toughness of Dissimilar AISI 304And AISI 4140 Continuous Drive Friction Welds”, Proceedings of International Welding Symposium, IWS(2K10), 10th-12th Feb, 2010.

 

PROCEEDINGS OF INTERNATIONAL CONFERENCE

1 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Some Aspects of Continuous drive friction welding of Dissimilar AISI 304 To AISI 4140”, National Welding Seminar Organized By Indian institute of welding and Bhilal Steel Plant, Bhilai (NWS-2011), 15th-17th Dec, 2011.

2 G.Subhash Chander, G.Madhusudhan Reddy and G.R.N.Tagore, "Deformation And Mechanical Behaviors of Dissimilar AISI 4140 To AISI 304 Friction Welds”, National welding seminar 2010, (NWS 2010), 21st-23rd Dec, 2010.


email: sbit.meexams@gmail.com